Speedwind ist ein unabhängiges Serviceunternehmen aus dem Bereich Windenergie.
QUALITY – FLEXIBILITY – EXPERT KNOWLEDGE – RELIABILITY
Loading...

Experience Speedwind

concept

Experience has been shown that during the process of generating wind energy enormous forces are acting on mechanical parts of the wind power station. Besides this fact, an additional attrition to the normal one exists. This is due to the change in operating conditions like the weather and temperature and has a negative impact on the quality of lubricants.

Therefore the frequently change of the specially constructed hydraulic system and the gear oil is important and vital prerequisite to ensure a long working life of the wind power station.

Speed Wind Offshore specially developed a special container-based system for the wind power station to suction and fill the system. The Speed Wind Offshore developed system enables a quick and clean exchange of lubricants.

Contact us

Oil change

on Wind Power Stations

The specialist for the service of oil changes on wind power stations

In collaboration with the company Ammenn, as a supplier of special lubricants for wind power station, offers in connection with any task to do the oil change a fast, accurate, reliable and absolutely smooth transaction.

Experience has been shown that during the process of generating wind energy enormous forces are acting on mechanical parts of the wind power station. Besides this fact, an additional attrition to the normal one exists. This is due to the change in operating conditions like the weather and temperature and has a negative impact on the quality of lubricants.

Reduce costs – minimizing downtimes – oil changes as required

Offshore-Oil Change with SWOC 1.0 Container-System

Certified toh:

  • DNV GL 2.7-1 Offshore Container*
  • DNV GL 2.7-2 Offshore Service Modules**

Feature:

  • Oil heated up to ensure shorter pump periods
  • Special flushing oil is ideal to clean the gear
  • The system can be used on a daily basis or on long-term use
  • High and advanced working and safety standards

The SWOC 1.0 container is a twenty-foot equivalent unit. The container is equipped with two separate hose systems and individually fills the gear and hydraulic system. The container is furnished with a protection system that prevents demolish of line, so that oil cannot leak and harm the environment. The gear oil becomes heated up to 50°C in the self-contained system before the pumping process starts. This operation is necessary to prevent thermal damage.

The used Flushing oil get recovered and processed in the end. During the processing of Flushing oil abrasive and corrosive particles as well as water and oil deposits gets separated, which leads to cost savings of up to 60 per cent.

DNV Standard 2.7-1: Offshore Service Container
DNV Standard 2.7-2: Offshore Service Modules

Wearsens ®

A new approach for loss prevention.

WearSens® recognizes changes on the engine from the beginning

It is possible to control the oil online with the WearSens® sensor system Speed Wind Offshore recommends the online-monitoring for the oil with WearSens ® A conditioned-based maintenance and the online-monitoring arises:

Longer oil change intervals – oil change as required:

  • Reduced costs
  • Protection of the environment and resources

With the additional use of online monitoring:

  • Detection of critical operating state
  • Harm reduction and increasing the runtime
  • Information about the oil condition in real time
Wearsens - ein neuer Ansatz zur Schadenprävention

Contact

Please send us a message with your request or questions; our friendly and highly qualified employees will contact you as soon as possible.

Speedwind Offshore GmbH & Co. KG, Luisenstraße 5a, 26382 Wilhelmshaven, Germany
info@speedwind-offshore.com, www.speedwind-offshore.com
Phone: +494421 - 9136713, Fax: +494421 - 202015